So I seem to have wound up replacing a bunch of stuff this week. It started with my landlord coming in to replace my air conditioning unit on Monday. They’ve needed to do that for quite a while now. That’s kind of a long story, but suffice it to say that, after around four hours of work, they managed to replace my A/C unit and thermostat. The A/C unit seems to be working fine. I can’t really say much about that, other than that it’s keeping the apartment cool and making less noise than the old one was. I’m curious to see whether the new unit has any effect on my electric bill. I can’t imagine that the old one was very efficient. I’ll look at my electric bill next month, but it’s getting into autumn now, so the bill would be going down anyway.
The thermostat is kind of interesting. The old one was a very old analog thermostat. The new one is a fairly low-end Honeywell digital thermostat. It’s programmable, but doesn’t have wifi support or any of that stuff, so you have to program it by pressing buttons on the unit itself, which is pretty annoying and time-consuming. I’ve got it running under a program, for now, but I may give up on that and go back to just nudging it up or down occasionally, like I used to do with the old thermostat.
Having the new thermostat and A/C unit has gotten me mildly interested in maybe getting a fancy thermostat with HomeKit support. But then I remind myself that I’m a single person in a one-bedroom apartment, which I almost never leave these days. So I really don’t need a smart thermostat.
The landlord was kind enough to leave the manual for the thermostat behind, so, as I normally do with these things, I wanted to put it in a folder, label the folder, and file it in my filing cabinet. I bought a Brother PT-1950 label maker in 2007, when I first got on my GTD kick, and I’ve been using it to label stuff since. But when I tried to use it to label my new “thermostat” folder, it didn’t work. I first thought that the batteries were dead, so I hopped on Amazon and ordered some new AA batteries. Then I remembered that I had an A/C adapter for the label maker, and tried that. I got an “EEPROM error”, which, according to the internet, means that I need to get the label maker serviced. Given that it’s more than ten years old, I decided to just trash it and get a new one instead. I looked at the Wirecutter reviews for label makers, but rejected their recommendations and bought a Brother P-Touch PT-D210 instead. It was only $35 from Amazon, and I was pretty sure that it used the same cartridges and A/C adapter as my old one.
It arrived today, along with the AA batteries I’d bought. The first problem was that I hadn’t noticed that this label maker uses 6 AAA batteries rather than the 6 AA batteries required for the old one. So I had to run over to ShopRite for AAA batteries. The second issue is that it uses slightly different tapes from the old one, so the half-used tape in the old one will have to get tossed. The new one came with a starter cartridge. Also, I have a spare cartridge from the old one that’s new enough to be compatible with both old & new label makers, so I have a full cartridge ready for when the starter one runs out.
So that was a long digression, all caused by wanting to print a label for a file folder. But now I have a fancy modern label maker, and I’m all set to start labeling stuff again.
Meanwhile, at work, we were notified recently that our company will no longer allow removable storage to be used on work computers. This isn’t a big problem, since I don’t normally have to use removable storage. But I do have a USB drive hooked up to my desktop that I was using for File History backups in Windows 10. (I’ve never needed to go back and pull anything from history, but I liked having it.) So now I need to give that up. Since I can’t use the drive at work anymore, I briefly though about bringing it home and using it to replace the drive I’m using for File History on my home PC. But of course it’s company property (even thought it’ll probably get recycled when I hand it back to help desk). And it’s a few years old. And a new 2 TB drive is only $60 from Amazon. So I went ahead ordered one of those yesterday. And that showed up in the mail today too.
The old drive I was using for File History at home had been acting up. It was still working, but I’d have to unplug it and plug it back in regularly to get it going. And it was almost full. It was a 640 GB drive that I bought from NewEgg in 2011, for $35. (I think it might have been refurbished.) Anyway, I guess I’ve gotten enough use out of it.
I had a second external drive hooked up to my home PC. That one was a 1 TB drive that was more than 10 years old. The only thing I had on it was a Macrium Reflect backup from 2018. I’d been wanted to do a new full image backup, with Macrium or something else, but every time I’ve tried that with my current PC, something went wrong. So I gave up on the idea at some point. I now rely on Bvckup, running daily backups to a second internal HD, which I started using in 2019, and the File History backup mentioned above. I hadn’t been having any issues with that 1 TB drive. Of course, I wasn’t actively using it, but it was recognized by Windows, and I could see the files on it. But, after I disconnected the old 640 GB drive, the 1 TB drive also stopped working. All I can think of is that I somehow shorted something out when I was removing the 640 GB drive. I spent some time troubleshooting it, but eventually gave up.
So now I just have a single 2 TB backup drive, which I haven’t hooked up yet, since it only showed up about 30 minutes ago. I’ll try to hook that up tomorrow, and hope it works.
I’ve got a box with two dead hard drives and a dead label maker in it, ready for the next Somerset County electronics recycling day, which will probably be Oct 2. And now I’m seeing other stuff around the apartment that I should probably replace. But I’m holding off, since replacing one thing seems to lead to a domino effect where I have to replace other things and buy other accessories and so on. So I guess I’ll keep using my 30-year-old toaster over for a while longer.