SSD upgrade, part one

Amazon’s same-day delivery got me my new Crucial MX500 SSD at around 6pm yesterday. It came in minimal packaging: no screws or cables or anything useful, just a 7mm to 9.5mm spacer (which I don’t think I’ll need). I found a spare SATA cable in my random cable box. And I managed to figure out a somewhat questionable way to mount it in my PC case with a single screw, temporarily. If it was actually an old-fashioned spinning hard drive, this would be a risky way to do it, but for an SSD, it should be fine.

The PC recognized the drive with no issues. I then installed the Acronis software from Crucial and cloned my old drive to the SSD. That took about two hours. (I’d assumed it would take much longer. And it probably would have, if I’d hooked up the drive via USB instead of mounting it internally.)

After that, I opened the PC case back up, unplugged the old drive, and plugged the new drive into the SATA 0 port on the motherboard. After that, I buttoned it back up and booted it. Surprisingly, everything worked. I’m really suspicious about that, since these things rarely go without a hitch. But hey, maybe I got lucky, just this once…

The next task is going to be mounting the drive correctly, with the bracket I ordered yesterday. So I’ll probably do that Monday night, or at some point during the week. And after that, I’ll hook the old drive back up, reformat it, and start using it as an internal backup disk. I’m hoping to do that next weekend.

So far, the drive seems to have done what I’d hoped for: The machine boots faster and everything loads much faster. If I don’t hit any snags, I may actually allow myself a moment of satisfaction and perhaps even happiness! (Well, maybe not happiness.) I’m hoping that this upgrade allows me to hold onto this PC for a couple of more years. I’d like to see it last until 2020 or 2021 maybe.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.